Votre panier est vide
Votre compte
P400X2
Amplificateur 2 Canaux 2x125WRMS @ 4Ohms / 2x200WRMS @ 2Ohms / 1x400WRMS @ 4Ohms bridge
379,00€ TTC
| CEA-2006 Compliant: |  CEA-2006 Power Rating125W x 2 @ 4Ω ≤1.0% THD+N |
| Number of Channels: | 2 |
| Rated Power (RMS Continuous Power): |
125 Watts x 2 @ 4-Ohm 200 Watts x 2 @ 2-Ohm 400 Watts x 1 @ 4-Ohm Bridged |
| Total Power (Sum of Rated Power): |
400 Watts |
| Dynamic Power (PVC/PowerCube®): |
149 Watts x 2 @ 4-Ohms 0° Res 256 Watts x 2 @ 2-Ohms 0° Res |
| Bridgeable: | Yes |
| Frequency Response: | 20Hz to 20kHz +/- 1.0dB |
| Efficiency (average): | 72% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise): | 4-Ohm: <1.0% 2-Ohm: <1.0% |
| Crossover Controls: | High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth All-Pass: Yes |
| Tone Controls: | Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz Function depends upon LP/AP/HP switch position |
| Input Sensitivity: | 150 mV - 12 V |
| Signal Input: | Hi/Low level: 1 RCA pair |
| Signal Output: | Low level: 1 RCA pair |
| Power Input Connector: | Captive C-Clamp |
| Power Wire Gauge: | 8 AWG to 4 AWG |
| Speaker Output Connector: | Captive C-Clamp |
| Speaker Wire Gauge: | 8 AWG to 18 AWG |
| Heat Sink Type: | Cast aluminum |
| Cooling: | Convection |
| Remote Controls: | Optional Punch Level Control (PLC2) Ready |
| Visual Indicators: | Power/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD |
| Circuit Topology Class: | Class A/B |
| Operating Voltage: | 9 - 16 VDC |
| Recommended Fuse (not included): |
60 A |
| Max. Current Draw (13.8V Sinewave): | 55 A |
| Average Current Draw (13.8V Music): | 28 A |
| Suggested Alternator: | 75 A |
| Shipping Weight: | 10.5 Lbs. (4.76 Kg.) |
| Dimensions (H x W x D): | 2.38 x 7.76 x 11.03 (in) 6.05 x 19.71 x 28.02 (cm) |
Vous devez être connecté pour poster un commentaire