R150X2
2X 50 Wrms sous 4 ohm ou 2X 75 Wrms sous 2 ohm ou 1X 150W rms sous 4 OHM
165,00€ TTC
| CEA-2006 Compliant: |  CEA-2006 Power Rating50W x 2 @ 4Ω ≤1.0% THD+N |
| Number of Channels: | 2 |
| Rated Power (RMS Continuous Power): |
50 Watts x 2 @ 4-Ohm 75 Watts x 2 @ 2-Ohm 150 Watts x 1 @ 4-Ohm Bridged |
| Total Power (Sum of Rated Power): |
150 Watts RMS |
| Dynamic Power (PVC/PowerCube®): |
61 Watts x 2 @ 4-Ohms 0° Res 94 Watts x 2 @ 2-Ohms 0° Res |
| Bridgeable: | Yes |
| Frequency Response: | 20Hz to 20kHz +/-1dB |
| Efficiency (average): | 66% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise): | 4-Ohm: <1.0% 2-Ohm: <1.0% |
| Crossover Controls: | High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth |
| Tone Controls: | Punch Bass: 0dB to +12dB @ 45Hz |
| Input Sensitivity: | 150 mV to 4 V |
| Signal Input: | Low Level: 1 RCA pair |
| Signal Output: | Low Level: 1 RCA pair |
| Power Input Connector: | Screw terminal |
| Power Wire Gauge: | 4 AWG |
| Speaker Output Connector: | Screw terminal |
| Speaker Wire Gauge: | 8 AWG |
| Heat Sink Type: | Extruded Aluminum |
| Cooling: | Convection |
| Remote Controls: | - |
| Visual Indicators: | Power/Protect LED |
| Circuit Topology Class: | Class-A/B |
| Operating Voltage: | 9 - 16 VDC |
| Recommended Fuse (not included): |
20 A |
| Max. Current Draw (13.8V Sinewave): | 20 A |
| Average Current Draw (13.8V Music): | 10 A |
| Suggested Alternator: | 75 A |
| Shipping Weight: | 6.6 Lbs. (2.99 Kg.) |
| Dimensions (H x W x D): | 1.98 x 6.77 x 11.22 (in) 5 x 17.2 x 28.5 (cm) |
| Dimensional Diagram: |  |
Ajouter un commentaire
