Amplificateur 4 Canaux 4x100WRMS @ 4/2Ohms / 2x200WRMS @ 4Ohms bridge
| CEA-2006 Compliant: |
 CEA-2006 Power Rating
100W x 4 @ 4Ω
≤1.0% THD+N |
Rated Power
(RMS Continuous Power): |
100 Watts x 4 @ 4-Ohm
100 Watts x 4 @ 2-Ohm
200 Watts x 2 @ 4-Ohm Bridged |
Total Power
(Sum of Rated Power): |
400 Watts |
Dynamic Power
(PVC/PowerCube®): |
128 Watts x 4 @ 4-Ohm
152 Watts x 4 @ 2-Ohm
290 Watts x 2 @ 4-Ohm Bridged |
| Bridgeable: |
Yes
Front Terminals: Left (+) Right (-)
Rear Terminals: Left (+) Right (-) |
| Frequency Response: |
20Hz-20kHz +/-1dB |
| Efficiency (average): |
>75% |
| Total Harmonic Distortion (THD+Noise): |
4-Ohm: <1.0%
2-Ohm: <1.0% |
| Signal-to-Noise (CEA): |
>90 dB |
| Channel Separation: |
>60 dB |
| Common Mode Rejection: |
>60 dB |
| Crossover Controls: |
High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
All-Pass: Yes |
| Tone Controls: |
Treble: 0 to +14 dB @ 12.5 kHz
Bass: 0 to +18 dB @ 45 Hz |
| Input Sensitivity: |
150 mV to 12 V |
| Signal Input: |
Front High/Low Level Input: 4-Pin harness
Rear High/Low Level Input: 4-Pin harness |
| Power Input Connector: |
Detachable Compression Terminal |
| Speaker Output Connector: |
Front: 4-Pin Harness
Rear: 4-Pin Harness |
| Speaker Wire Gauge: |
16 AWG |
| Heat Sink Type: |
Extruded Aluminum |
| Visual Indicators: |
Power: Blue LED
Protect: Red LED
Input Clip: Red LED3
Output Clip: Blue/Violet/Red LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD |
| Circuit Topology Class: |
Class AD |
| Operating Voltage: |
9 - 16 VDC |
Recommended Fuse
(not included): |
60 A |
| Max. Current Draw (13.8V Sinewave): |
55 A |
| Average Current Draw (13.8V Music): |
28 A |
| Suggested Alternator: |
75 A |
| Shipping Weight: |
3.4 Lbs. (1.54 Kg.) |
| Dimensions (H x W x D): |
1.6 x 4.3 x 8.3 (in.)
4.1 x 10.8 x 21.1 (cm) |
