R600X5
Amplificateur 5 Canaux 4x50WRMS @ 4Ohms / 4x75WRMS @ 2Ohms / 2x150WRMS @ 4Ohms Bridge & 1x200WRMS @ 4Ohms / 1x300WRMS @ 2Ohms
| CEA-2006 Compliant: |
 CEA-2006 Power Rating
50Wx4 + 200Wx1 @ 4Ω
≤1.0% THD+N |
Rated Power
(RMS Continuous Power): |
50 Watts x 4 @ 4-Ohms +
200 Watts x 1 @ 4-Ohms
75 Watts x 4 @ 2-Ohms +
300 Watts x 1 @ 2-Ohms |
Total Power
(Sum of Rated Power): |
600 Watts RMS |
Dynamic Power
(PVC/PowerCube®): |
58 Watts x 4 @ 4-Ohms 0° Res +
224 Watts x 1 @ 4-Ohms 0° Res
95 Watts x 4 @ 2-Ohms 0° Res +
403 Watts x 1 @ 2-Ohms 0° Res |
| Frequency Response: |
20Hz - 20kHz +/-1dB |
| Efficiency (average): |
Front/Rear: 64% @ 4-Ohm
Sub: 85% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise): |
Front/Rear 4-Ohm: <1.0%
Front/Rear 2-Ohm: <1.0%
Sub 4-Ohm: <1.0%
Sub 2-Ohm: <1.0% |
| Signal-to-Noise (CEA): |
>80 dB |
| Channel Separation: |
>50 dB |
| Common Mode Rejection: |
>55 dB |
| Crossover Controls: |
Front/Rear: High-Pass/Low-Pass 50-250Hz
Sub: Low-Pass variable 50Hz - 250Hz |
| Tone Controls: |
Front/Rear: 0dB/+6dB/+12dB @ 45Hz
Sub: Variable 0dB to +12dB @ 45Hz
Sub: 0°/180° Phase Control |
| Input Sensitivity: |
450 mV - 12 V |
| Signal Input: |
High Level: 2 x 4-pin MOLEX
Low Level: 3 Pair RCA |
| Power Input Connector: |
Screw Terminal |
| Speaker Output Connector: |
Screw Terminal |
| Speaker Wire Gauge: |
8 AWG |
| Remote Controls: |
Punch Level Control
(when connected, is linked to "gain control" to provide remote output level) |
| Visual Indicators: |
Power
Protect |
| Circuit Topology Class: |
Class A/B + Class D (Sub) |
| Operating Voltage: |
9 - 16 VDC |
Recommended Fuse
(not included): |
80 A |
| Max. Current Draw (13.8V Sinewave): |
70 A |
| Average Current Draw (13.8V Music): |
35 A |
| Suggested Alternator: |
75 A |
| Shipping Weight: |
9.5 Lbs. (4.30 Kg.) |
| Dimensions (H x W x D): |
1.98" x 6.77" x 13.19"
(5cm x 17.2cm x 33.5cm) |
