Ampli P500X1BD

 

Sans titre 19

Amplificateur Mono 1x150WRMS @ 4Ohms / 1x300WRMS @ 2Ohms / 1x500WRMS @ 1Ohm

CEA-2006 Compliant: CEA-2006 Power Rating
150W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels: 1
Rated Power 
(RMS Continuous Power):
150 Watts x 1 @ 4-Ohm 
300 Watts x 1 @ 2-Ohm 
500 Watts x 1 @ 1-Ohm
Total Power 
(Sum of Rated Power):
500 Watts
Dynamic Power 
(PVC/PowerCube®):
224 Watts x 1 @ 4-Ohm 
410 Watts x 1 @ 2-Ohm 
787 Watts x 1 @ 1-Ohm
Bridgeable: No
Frequency Response: 20Hz to 250Hz +/- 1.0dB
Efficiency (average): 86% @ 4-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% 
2-Ohm: <1.0% 
1-Ohm: <1.0%
Signal-to-Noise (CEA): >80 dB
Common Mode Rejection: >55 dB
Damping Factor: >300
Crossover Controls: Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth 
Infrasonic Filter (IF): 28Hz @ 12dB/Octave 
All-Pass (AP): No
Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz
Input Sensitivity: 150 mV - 12 V
Signal Input: Hi/Low level: 1 RCA pair
Signal Output: Low level: 1 RCA pair
Power Input Connector: Captive C-Clamp
Power Wire Gauge: 4 AWG
Speaker Output Connector: Captive C-Clamp
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Punch Level Control (PLC2) Ready
Visual Indicators: Power/Protect/Thermal LED 
Input Clip LED3 
Output Clip LED1,2,3 

LED Color Legend: 
1BLUE: <0.5% THD 
2VIOLET: 1% THD 
3RED: 10%+ THD
Circuit Topology Class: Class BD
Operating Voltage: 9 - 16 VDC
Recommended Fuse 
(not included):
80 A
Max. Current Draw (13.8V Sinewave): 70 A
Average Current Draw (13.8V Music): 35 A
Suggested Alternator: 75 A
Shipping Weight: 10.8 Lbs. (4.89 Kg.)
Dimensions (H x W x D): 2.38 x 7.76 x 11.03 (in) 
6.05 x 19.71 x 28.02 (cm)

399,00€ TTC

  • Aucune note. Soyez le premier à attribuer une note !

Vous devez être connecté pour poster un commentaire