Votre panier est vide
Votre compte
PBR300X1
Amplificateur Mono Full-Range 1x75WRMS @ 4Ohms / 1x150WRMS @ 2Ohms / 1x300WRMS @ 1Ohm
279,00€ TTC
| CEA-2006 Compliant: |  CEA-2006 Power Rating75W x 1 @ 4Ω ≤1.0% THD+N |
| Number of Channels: | 1 |
| Rated Power (RMS Continuous Power): |
75 Watts x 1 @ 4-Ohm 150 Watts x 1 @ 2-Ohm 300 Watts x 1 @ 1-Ohm |
| Total Power (Sum of Rated Power): |
300 Watts |
| Dynamic Power (PVC/PowerCube®): |
96 Watts x 1 @ 4-Ohm 189 Watts x 1 @ 2-Ohm 326 Watts x 1 @ 1-Ohm |
| Bridgeable: | No |
| Frequency Response: | 20Hz - 250Hz +/-3dB |
| Efficiency (average): | 75% @ 4-Ohm 75% @ 2-Ohm 75% @ 1-Ohm |
| Total Harmonic Distortion (THD+Noise): | 4-Ohm: <1.0% 2-Ohm: <1.0% |
| Signal-to-Noise (CEA): | >86 dB |
| Channel Separation: | — |
| Common Mode Rejection: | >65 dB |
| Damping Factor: | >200 |
| Crossover Controls: | Low-Pass: 35Hz - 250Hz @ 12dB/Octave Butterworth |
| Tone Controls: | External via Optional Punch EQ |
| Input Sensitivity: | Low-Level: 150 mV - 4 V High-Level: 400 mV - 11 V |
| Signal Input: | High/Low Input Switch High/Low Level Input: 4-Pin harness Hi-Level Sensitivity: Variable DC offset sensitivity |
| Signal Output: | - |
| Power Input Connector: | Detachable Compression Terminal |
| Power Wire Gauge: | 10 AWG |
| Speaker Output Connector: | 4-Pin Harness Wiring Convenience: 2 Negative Terminals (-) / 2 Positive Terminals (+) |
| Speaker Wire Gauge: | 16 AWG |
| Heat Sink Type: | Extruded aluminum |
| Cooling: | Convection |
| Remote Controls: | Optional PEQ provides 0dB to +18dB @ 45Hz |
| Visual Indicators: | Power/Protect, BRT (Boost) |
| Circuit Topology Class: | Class BR |
| Operating Voltage: | 9 - 16 VDC |
| Recommended Fuse (not included): |
30 A |
| Max. Current Draw (13.8V Sinewave): | 30 A |
| Average Current Draw (13.8V Music): | 15 A |
| Suggested Alternator: | 75 A |
| Shipping Weight: | 2.76 Lbs. (1.25 Kg.) |
| Dimensions (H x W x D): | 1.53 x 4.25 x 6.75 (in.) 3.90 x 10.8 x 17.2 (cm) |