Amplificateur Mono Full-Range 1x175WRMS @ 4Ohms / 1x300WRMS @ 2Ohms / 1x500WRMS @ 1Ohm
| CEA-2006 Compliant: |
 CEA-2006 Power Rating
175W x 1 @ 4Ω
≤1.0% THD+N |
Rated Power
(RMS Continuous Power): |
175 Watts x 1 @ 4-Ohm
300 Watts x 1 @ 2-Ohm
500 Watts x 1 @ 1-Ohm |
Total Power
(Sum of Rated Power): |
500 Watts |
Dynamic Power
(PVC/PowerCube®): |
206 Watts x 1 @ 4-Ohm
365 Watts x 1 @ 2-Ohm
580 Watts x 1 @ 1-Ohm |
| Frequency Response: |
20Hz - 250Hz +/-3dB |
| Efficiency (average): |
75% @ 4-Ohm
75% @ 2-Ohm
65% @ 1-Ohm |
| Total Harmonic Distortion (THD+Noise): |
4-Ohm: <1.0%
2-Ohm: <1.0% |
| Crossover Controls: |
35Hz - 250Hz Low Pass @ 12dB/Octave Butterworth |
| Tone Controls: |
Optional Remote Punch EQ |
| Input Sensitivity: |
Low-Level: 150 mV - 4 V
High-Level: 400 mV - 11 V |
| Signal Input: |
High/Low Input Switch
High/Low Level Input: 4-Pin Harness
High-Level Sensitivity: Variable DC offset sensitivity |
| Power Input Connector: |
Detachable Compression Terminal |
| Speaker Output Connector: |
Detachable Compression Terminal |
| Speaker Wire Gauge: |
12 AWG |
| Heat Sink Type: |
Extruded aluminum |
| Remote Controls: |
Optional PEQ provides 0dB to +18dB @ 45Hz |
| Visual Indicators: |
Power/Protect, BRT (Boost) |
| Circuit Topology Class: |
Class BR |
| Operating Voltage: |
9 - 16 VDC |
Recommended Fuse
(not included): |
60 A |
| Max. Current Draw (13.8V Sinewave): |
60 A |
| Average Current Draw (13.8V Music): |
30 A |
| Suggested Alternator: |
75 A |
| Shipping Weight: |
3.3 Lbs. (1.49 Kg.) |
| Dimensions (H x W x D): |
1.53" x 4.25" x 8.2"
(3.90 cm x 17.2 cm x 20.82 cm) |
